France: mandatory fibre and a label for smart buildings

How France has required fibre in buildings since 2008, and why the sector also built the R2S label.

Lessons from other countries··8 min read·Editorial team: IT-Label

Key takeaways

  • France has required fibre in new buildings since the 2008 law (LME). Since 2016, this has applied to all new construction.
  • Since 2017, the obligation has also applied to major renovations with a building permit, provided the fibre does not cost more than 5% of the works.
  • Alongside the law, there is a voluntary label for non-residential buildings: Ready2Services (R2S). The sector drew up the requirements, and the certifier Certivéa issues the label.
  • R2S looks beyond the connection, including at the building network and digital security. Version 2 arrived in 2022.
  • The lesson for the Benelux: the law lays the foundation, and a label makes the quality above it visible. Both are needed.

France is an interesting country to look at. It combines two things that are still separate in the Benelux. On the one hand, there is a legal fibre obligation for buildings, which has been extended step by step. On the other hand, there is a voluntary label that assesses the digital quality of non-residential buildings.

France was already mentioned briefly in the overview what the IT-Label can learn from other countries. In this article we go deeper. How did the French approach come about, what has it achieved, and where does it fall short?

How it works: first the law, then the label

The French rules have grown in small steps. Each law or decree added a group of buildings. This is what the timeline looks like:

  • 2008: the Loi de modernisation de l'économie (LME, law 2008-776, article 109) stipulates that new buildings with several homes or business units must have fibre to every home and every unit. This applies to building permits issued after 1 January 2010. For buildings with up to 25 units, the date is 1 January 2011.
  • January 2009: three decrees implement the law. Decree 2009-52 requires at least one fibre per home or unit, running to an accessible connection point in the building that several networks can use. Decree 2009-53 governs the "right to fibre" from the same law: the owner may not refuse a connection for a tenant without good reason. Decree 2009-54 governs the agreements with the operator.
  • December 2011: decree 2011-1874 allows several fibres per home. In densely built-up areas, the obligation can rise to four fibres per home. This applies to building permit applications from 1 April 2012.
  • 2015: the loi Macron (law 2015-990, article 118) extends the obligation to buildings with one home or one business unit, to new housing developments and to renovations with a building permit.
  • August 2016: decree 2016-1182 implements this for all new construction, both homes and business units. It applies to building permit applications from 1 October 2016.
  • May 2017: decree 2017-832 covers renovation. For works with a building permit on a building with several homes or business units, fibre must be installed. This is not required if the fibre costs more than 5% of the cost of the works.
  • 2018: the Smart Buildings Alliance (SBA), an association of companies from the sector, draws up the Ready2Services (R2S) framework. Certivéa, a certifier for buildings, issues the label.
  • June 2022: version 2 of R2S is published, based on experience with the first version.

The R2S label is intended for non-residential buildings: new, renovated or in use. It looks at six themes: connectivity, network architecture, equipment and interfaces, digital security, responsible management and digital services. There are four levels, from zero to three stars.

A central idea is the "Smart Network": one building network that connects all technical systems, instead of a separate network for each system. The label is based on open standards, such as the Internet Protocol (IP) and open interfaces (APIs).

What it has achieved

Above all, the law ensured that new buildings do not lag behind: anyone putting up a new building installs fibre from the start.

France has also built a large fibre network. According to the regulator ARCEP, at the end of June 2026, 43.1 million of the 45.2 million homes and business premises could be connected to fibre. That is 95.3%. There were 28.1 million fibre subscriptions, 85% of all internet subscriptions. That is not only thanks to the building rules, but they did ensure that new buildings are included from day one.

The R2S label has delivered something else: a shared language. Owners, designers and installers have one framework to describe what a "smart and connected" building is. According to Certivéa, on 1 January 2022 there were 93 approved R2S referents: professionals who guide projects. Extensions also followed, such as R2S-4GRIDS for energy management.

French law ensures that the fibre is there. The label asks what the building does with it.

Where it falls short

The French approach also has limits:

  • The law regulates presence, not performance. The obligation covers fibres, a connection point and space for cables. The law does not test whether the network in the building works well.
  • Existing buildings are largely excluded. The renovation obligation only applies to works with a building permit, and only if the fibre costs no more than 5%. An office that is not being renovated stays out of the picture.
  • The last few metres are difficult. At the end of June 2026, 2.1 million addresses still could not be connected. For more than a third of these, according to the operators, third parties such as owners' associations refused the installation, or the building was still under construction.
  • The label is voluntary and costs money. Certivéa cites an average fee of €12,750 excluding VAT, depending on the project and the floor area. That is a hurdle for smaller buildings. We have not found public figures on the number of labelled buildings.
  • The label is aimed at non-residential buildings. For homes, the SBA has a separate framework, R2S Résidentiel. And the framework originated in France and is best known there.

Curious about your building's IT-Label?

Discover how your property scores on digital infrastructure.

Request an IT-Label

What the Benelux can learn from it

First: a law can grow in steps. France started with large new buildings and then added smaller buildings, single-family homes and renovations.

Second: a cost limit makes an obligation feasible, but also leaves a gap. The 5% limit for renovation prevents unreasonable costs. With Part R, England chose a similar solution for new homes, with a limit of £2,000 per home. You can read more about this in England has Part R. Europe has the Gigabit Infrastructure Act. What now?

Third: the European rules are heading in the same direction. Since 12 February 2026, the Gigabit Infrastructure Act has required fibre-ready infrastructure in new buildings and buildings undergoing major renovation. What France has been doing since 2010 is therefore becoming the baseline here too.

Fourth: a label works better when the sector is involved. With R2S, the sector wrote the requirements, and an independent certifier awards the label. London also set up a voluntary assessment, but there the Mayor of London gave the first push. You can read that comparison in the connectivity rating for offices in London.

What this means for the IT-Label

The IT-Label is closely aligned with the French lesson. Like R2S, it looks beyond the connection alone. The six assessment areas of the IT-Label are connectivity, infrastructure, performance, scalability, integration and smart building.

There are also differences. The IT-Label also measures how the infrastructure works in practice, and is intended for new and existing commercial real estate. That is precisely the part that French law does not touch. A Certified Partner carries out the audit according to one fixed method, and the certificate is valid for two years.

France shows that law and label complement each other: the law ensures a minimum, and the label makes the differences above it visible. That is why we advocate one shared yardstick in the Netherlands, Belgium and Luxembourg. Read why the IT-Label should become the Benelux standard, or see all countries in the overview of what other countries teach us.

Frequently asked questions

Is fibre mandatory in new buildings in France?

Yes. Since the 2008 law, new buildings with several homes or business units must have fibre. Since decree 2016-1182, this applies to all new construction, including single-family homes and buildings with one business unit, for building permit applications from 1 October 2016.

Does the French fibre obligation also apply to renovation?

Sometimes. Since May 2017, it has applied to works with a building permit on buildings with several homes or business units. The obligation lapses if the fibre costs more than 5% of the cost of the works.

What is the R2S label?

Ready2Services (R2S) is a voluntary label for non-residential buildings. The Smart Buildings Alliance drew up the framework, and Certivéa issues the label. It assesses six themes, including connectivity, network architecture and digital security, and has four levels.

What is the difference between R2S and the IT-Label?

Both look beyond the connection alone. R2S was developed in France and focuses on non-residential buildings with a shared building network. The IT-Label was developed for the Benelux, has six levels from IT1+ PREMIUM to IT5 SHELL, and also measures how the infrastructure works in practice.

Curious about your building's IT-Label?

Discover how your property scores on digital infrastructure.

Request an IT-Label

Looking beyond the fibre

Would you like to know where your building stands now? With an IT-Label Pre-inspection, a Certified Partner examines the digital infrastructure of your building, and you receive a report with the strengths and areas for improvement.

Would you like to stay up to date on legislation, standards and the digital quality of buildings? Subscribe to the newsletter.

Sources: ARCEP, Loi de modernisation de l'économie, article 109; Journal officiel, decree 2009-52; Maire-info, the three decrees of January 2009; Journal officiel, decree 2011-1874; ARCEP, telecoms provisions of the loi Macron; Banque des Territoires, decree 2016-1182; Banque des Territoires, decree 2017-832; ARCEP, fixed broadband market, 10 September 2026; Certivéa, Ready2Services label; Smart Buildings Alliance, R2S framework. Checked on 18 October 2026.

How does your building score?

Do the free IT-Label Self-Scan: ten questions, three minutes, an indication straight away. Start the Self-Scan

This article was written by the IT-Label editorial team, which is responsible for its content.

Share this article

Stay up to date with our knowledge articles

Receive our new articles on digital infrastructure in real estate in your inbox. No spam, unsubscribe at any time.

We only use your details for the newsletter. Read our privacy policy.

Have a question?

Contact us for more information about the IT-Label.

Get in touch

Request an IT-Label

Leave your details and we will get in touch to walk through the process.

Classifications IT1+, IT1, IT2, IT3, IT4, IT5