Why hackers choose the building management system: OT security in four real cases

Attackers do not only look at computers, but also at the installations in your building. Four verified cases show how that works, and what you can do about it.

IT and OT in buildings·Cybersecurity and building security··8 min read·Editorial team: IT-Label

Key takeaways

  • Attackers increasingly target the OT in buildings, such as the building management system. It is often poorly secured and rarely monitored.
  • Real cases show what can happen: an office whose climate system was open on the internet, apartment blocks without heating, a casino robbed via an aquarium and an office building whose lighting was locked.
  • For attackers, OT is an easy way into the network, and an attack has immediate consequences that people feel.
  • You reduce the risks with an overview of your OT, no systems directly on the internet, strong passwords, secure remote access and separate networks.

Why an attacker chooses the building

When people think of hackers, they think of stolen data and encrypted computers. But attackers also look at the installations in a building. That is no coincidence. For an attacker, OT has a few handy properties:

  • Weak security. Many building systems still run with the factory password, or with old software without updates.
  • Reachable from outside. Installations are managed remotely. Sometimes they are even directly open on the internet, where special search engines find them in seconds.
  • Nobody is watching. The IT department monitors the computers, but often does not see what happens on the installations network.
  • A stepping stone. If the OT is on the same network as the computers, a building system is a door to everything else.
  • Immediately felt. A building without heating or light puts the owner under pressure straight away.

In the first part of this series we already mentioned the well-known example of Target in 2013. There, attackers got in with the login details of a supplier of climate installations. Below are four other cases, each with its own lesson.

Timeline of four real attacks on building management systems and other OT, from 2013 to 2021, with the lesson of each case and the routes attackers use to get in.
Four real cases of attacks on OT in buildings, with the lesson of each case. Source: IT-Label. Free to use with attribution.

Case 1: Google's climate system in Sydney (2013)

In 2013, researchers from the security company Cylance used the search engine Shodan to look for building systems that were open on the internet. Among others, they found the building management system of a Google office in Sydney. It ran on outdated software.

Through a weakness, the researchers reached a file containing the administrators' passwords. They could see a floor plan of one storey, showing the pipes and the climate installation. The researchers did nothing malicious and reported it to Google. Google quickly took the system offline. According to Google, an attacker could only have controlled the heating and cooling.

The lesson: even a company with a lot of IT expertise had a building system that was open on the internet. The building management system often falls outside the view of the IT department.

Case 2: apartment blocks without heating in Finland (2016)

In November 2016, the heating and hot water systems of at least two apartment blocks in the Finnish city of Lappeenranta were hit. It was a DDoS attack: an attack in which a system is flooded with so much traffic that it stops working.

According to media reports, the building management system lost its connection to the internet. It kept trying to reconnect and restarted again and again. Meanwhile, the heating and hot water did not work properly, in the middle of the Finnish winter.

The lesson: an attacker does not even need to get in. If an installation depends on the internet, a disruption from outside can be enough. Make sure an installation keeps working safely if the connection drops.

Curious about your building's IT-Label?

Discover how your property scores on digital infrastructure.

Request an IT-Label

Case 3: a casino robbed via the aquarium (told in 2018)

In 2018, the CEO of the security company Darktrace told a conference about a casino in North America. The casino's name has never been disclosed. In the lobby there was an aquarium with a thermometer connected to the network.

Attackers got in through that thermometer. From there, they found a database on the network with data on the casino's best customers, the so-called high rollers. They sent that data out via the thermometer.

The lesson: a small, harmless-looking device can be the way into your most important data. Everything connected to the network counts. That is why smart devices belong on their own network, separate from the computers.

Case 4: an office building in Germany locked (2021)

In 2021, a German engineering firm for building automation lost control of hundreds of devices in an office building it had set up. They were light switches, motion detectors and sun shading controls, all on KNX.

An attacker had wiped and locked about three quarters of the devices. To do so, they misused a security feature of KNX itself: a key, a kind of password, that is meant to protect devices against changes. The KNX Association recommends setting that key yourself on every project. The engineering firm had to switch on the lights by hand via the main circuit breakers. Only after a security company had recovered the key from one of the devices could everything be reconfigured.

This problem is still relevant. In July 2026, the US cyber agency CISA added the related KNX weakness to its list of vulnerabilities that are actually being exploited.

The lesson: a security feature you do not set yourself can be used against you by an attacker. Ask your installer whether the security of KNX and other systems has been set up. Read more about these protocols in the part on BACnet, KNX and Modbus.

What these cases have in common

None of these cases required an advanced attack. They involved systems that were open on the internet, devices on the same network as important data, and security that had not been set up. Those are exactly the things you can arrange.

The same was true of the Mirai botnet in 2016, which took over cameras and recorders using default passwords. We describe that case in How secure is the smart building?

Curious about your building's IT-Label?

Discover how your property scores on digital infrastructure.

Request an IT-Label

What you can do about it

Securing your building management system starts with overview and agreements, not with expensive technology. Eight steps:

  1. Make an overview of your OT. What you do not know about, you cannot secure. You can read how in part 2 of this series.
  2. Take systems off the open internet. A building management system should not be directly reachable from the internet.
  3. Replace default passwords. Every device gets its own strong password.
  4. Secure remote access. Only via a secure connection, with an extra check when logging in, and only for those who really need it.
  5. Separate the networks. Building systems, guests and office each on their own network. Read more in the part on separating IT and OT.
  6. Switch on security features. Ask your installer whether features such as KNX Secure or BACnet/SC are possible, and whether they are switched on.
  7. Keep software up to date. Agree with your suppliers when and how updates are installed.
  8. Know what to do in an outage. Can the installation be operated by hand? Whom do you call, and who decides?

Good agreements between your IT partner and your installer are essential here. That was the subject of part 3 of this series.

What the IT-Label and the Security Audit do here

The IT-Label assesses the digital infrastructure of a building: the connection, the cabling, the Wi-Fi and the technical room. The IT-Label does check whether smart building systems are present, such as climate, access and cameras, but it does not assess how secure that OT is. The inspector does check whether the building management system is connected to the IT network. Then you know that an attack on one can also affect the other.

Do you want to know whether your building systems are properly separated from the office network? In the Security Audit, an auditor checks on site whether your network is separated from guests, other tenants and the building systems, such as access and climate. You receive a report with the risks and advice on how to segregate the networks.

Your next step

Start with the free IT-Label Self-Scan. In a few minutes you will see how well you know your building and where the points for attention are. Want to know how attackers also get in physically? Then read This is how they got in: ten real cases of physical hacks and sabotage.

This is part 4 of a series on IT and OT in buildings. A new part appears every Wednesday. Next week you can read what the Dutch Cyber Security Act and NIS2 mean for the OT in your building. All terms and parts can be found on the page IT and OT in buildings.

Curious about your building's IT-Label?

Discover how your property scores on digital infrastructure.

Request an IT-Label

Frequently asked questions

What is OT security?

OT security is the protection of operational technology: the systems that control physical processes, such as climate, lighting, lifts and access. The goal is that these systems keep working safely and cannot be operated by unauthorised people.

Why do hackers attack building management systems?

Because they are often poorly secured, are sometimes open on the internet and are rarely monitored. A building system can also be a way into the office network. And an attack has consequences that are felt immediately, such as a building without heating or light.

How do I secure my building management system?

Make an overview of your OT, take systems off the open internet, replace default passwords, secure remote access and separate the networks. Switch on available security features and agree with your suppliers how updates are installed.

Is my building of interest to hackers?

Probably, yes. Many attackers do not look for a particular building, but for weak systems they find with search engines. An exposed building management system with a default password is then an easy target, no matter who owns the building.

Does the Security Audit also test whether my building management system can be hacked?

No. The Security Audit is a physical on-site audit of the Wi-Fi, the network and the server room. The auditor checks whether your network is separated from guests, other tenants and the building systems, and gives advice. The IT-Label does not assess how secure the OT is, but the inspector does check whether the building management system is connected to the IT network.

How does your building score?

Do the free IT-Label Self-Scan: ten questions, three minutes, an indication straight away. Start the Self-Scan

This article was written by the IT-Label editorial team, which is responsible for its content.

Share this article

Stay up to date with our knowledge articles

Receive our new articles on digital infrastructure in real estate in your inbox. No spam, unsubscribe at any time.

We only use your details for the newsletter. Read our privacy policy.

Have a question?

Contact us for more information about the IT-Label.

Get in touch

Request an IT-Label

Leave your details and we will get in touch to walk through the process.

Classifications IT1+, IT1, IT2, IT3, IT4, IT5