Everything in your building talks to each other. Who keeps it safe?

The attacks on supermarket refrigeration show what can go wrong when smart systems work together. Why security starts with making things visible.

Cybersecurity and building security·IT and OT in buildings··9 min read·Editorial team: IT-Label

Key takeaways

  • Climate control, access, cameras, lifts, charging points and meters in a building need to work together more and more often. To do that, they are connected to a network, and often to the internet as well.
  • The attacks on shop refrigeration in October and November 2026 show what can go wrong. In one night, shops in at least twelve European countries were hit.
  • The biggest problem is not the technology, but the overview. In many buildings, nobody knows exactly which systems are connected, who manages them and which ones can be reached from the internet.
  • That is why the order is: first make it visible, then secure it. What you cannot see, you cannot protect.
  • The IT-Label makes visible what there is in a building. It is not a quality mark that says a building is safe. The Security Audit goes one step further.

A modern building is no longer a collection of separate installations. The climate control looks at occupancy. The access card switches on the lights. The charging points take the solar panels into account. That is smart, and it saves energy and effort.

But everything that talks to each other can also be addressed by someone else. That became painfully clear in recent weeks, not in offices, but in supermarkets.

What happened at the supermarkets

On the night of 1 to 2 November 2026, refrigeration in shops was disrupted remotely. The units were told to start defrosting. The temperature rose, sometimes to 50 °C, and shops had to throw away fresh and frozen products. Three weeks earlier, the same thing had already gone wrong in France. We wrote about this earlier in from cold store to server room and another attack on shop refrigeration.

More is now known:

  • Scale. According to RetailDetail, shops in at least twelve European countries were affected, including Belgium (76 shops), the Netherlands (17), Germany, Italy, Denmark, Romania and Portugal.
  • Who was hit. Mainly older or poorly secured installations. Many chains had carried out updates after France, but not everywhere.
  • Europe. The European Commission held crisis talks with, among others, the European cybersecurity agency ENISA and Europol.
  • Perpetrators. Two pro-Russian groups say they did it. This has not been confirmed, and the channels on which they reported it have already disappeared. So it is not yet certain who is behind it.

What stands out is what one of those groups wrote: in their view, the problem is not the hackers, but the "systemic negligence" of the companies themselves. Of course, that is an easy excuse. But it does touch a sore spot.

Why this is a dangerous development

This is not about stolen data. It is about installations that do something in the real world: cooling, heating, opening doors, running lifts. If they get the wrong commands, the damage is visible at once. Spoilage, downtime and, in the worst case, unsafe situations.

And the number of such installations is growing fast. There are three reasons:

  • Working together brings a lot of benefits. Systems that share data save energy and make a building more pleasant. That is why they are connected more and more often. Read more about why IT and building systems are growing together.
  • Remote maintenance is convenient. An installer who can see faults from the office needs to visit less often. But for that, the system must be reachable.
  • Rules push in the right direction, but they also ask something. Buildings above a certain capacity must have building automation. That is good for energy, but it also means more systems on the network.
Smart building explained: on the left six smart systems working separately, on the right the same systems on one network around the building management system.
Separate smart systems versus systems that work together, and what the IT-Label assesses. Source: IT-Label. Free to use with attribution.

The real problem: nobody sees the whole picture

At the supermarkets, this was not an advanced new attack. The weak spots had been known for months. Even so, some control units were still open. How is that possible?

Because in many buildings, nobody has the overview. The refrigeration installer fits a control cabinet. The climate supplier puts in a modem. The security company hangs up cameras. Each one does their own part well, but nobody keeps track of everything that is connected to the network and to the internet in total.

We see this in three questions that often have no answer:

  1. What is connected? Is there a list of all smart systems in the building?
  2. Who owns it? For each system, do you know who manages it and who does the updates? The landlord thinks of installations, the tenant of their own IT, the installer of their maintenance. The connection itself falls in between.
  3. What can be reached? Which systems can be operated from the internet, and by which route?

So when a warning comes from a manufacturer or the government, it does not reach the person who can act on it. Or that person does not know it is about their building.

Curious about your building's IT-Label?

Discover how your property scores on digital infrastructure.

Request an IT-Label

First make it visible, then secure it

That is why our message is simple: what you cannot see, you cannot secure. A firewall, an update or a separate network only helps if you know what it is needed for.

So the order is:

  1. See. Map which systems there are, how they are connected and who manages them.
  2. Understand. Decide which systems are important and what happens if they fail or get the wrong commands.
  3. Secure. Only then do you choose the right measures: separate, shield, update and monitor.

If you skip step 1, you are securing by guesswork. And then the control unit that nobody knows about is exactly the one that is open.

What the IT-Label does here

The IT-Label is made exactly for step 1: making things visible. An independent auditor looks at the digital infrastructure of the building and records what there is. For security, these points matter most:

  • Which smart building systems there are, such as climate control, access, cameras and the building management system (BMS), and whether they work together.
  • Whether the BMS is connected to the IT network.
  • Whether networks are separated, and whether there is security and monitoring on the network.
  • Where the technical rooms are and whether they are locked.

This gives the owner and the tenant one shared picture of the building. That is the starting point for every conversation about security.

So is the IT-Label an IT Security Label?

We get this question more and more often. The honest answer is: no, but it is the first step.

The IT-Label does not say that a building is safe. It does not test whether a system can be hacked. But it does show what there is and how it is connected, and with that, where the risks may be. A label that promises that a whole building is safe does not exist. That would not be honest either: security changes with every new installation and every update.

If you want to go further, you can have the IT-Label Security Audit carried out. An auditor then checks the wifi, network and server room on site, looks at whether the building systems are separated from guests and tenants, and gives advice. For a real hacking test, you need a specialist company. You can read more about what people mean by an IT Security Label on our page about the IT Security Label.

Curious about your building's IT-Label?

Discover how your property scores on digital infrastructure.

Request an IT-Label

Our advice in five steps

  1. Make a list. Write down which smart systems there are in the building: climate control, refrigeration, access, cameras, lifts, charging points, solar panels, meters. Ask your installers if you do not know.
  2. Appoint an owner for each system. Who manages it, who does the updates, and who gets a warning from the manufacturer? Record this, also between landlord and tenant.
  3. Check what can be reached from the internet. Ask every supplier how they log in remotely. A control screen should not be open on the internet. Use a secure connection and switch off access when it is not needed.
  4. Separate the networks. Building systems, tenants and guests should not be on the same network. Then one weak device cannot affect the whole building.
  5. Make a plan for incidents. Who gets the alarm at night, and what do they do then? What still works if the network fails?

Do you want more questions for each system? In how safe is the smart building? you will find a detailed checklist.

Where you can start

  • The free Self-Scan gives you a first picture of your property in a few minutes.
  • A pre-inspection maps on site what there is, including the smart building systems.
  • The Security Audit checks the security of the wifi, network and server room and gives advice.

Smart buildings will only get smarter. That is good news, as long as someone keeps the overview. So do not start with the question of how to secure everything, but with the question of what is actually there.

Frequently asked questions

Why do I have to make everything visible first?

Because you can only secure what you know. A system that is not on any list gets no updates and nobody monitors it. These are exactly the systems that attackers find first.

Who was behind the attack on the supermarket refrigeration?

That is not yet certain. Two pro-Russian groups say they did it, but this has not been confirmed. The investigation is still ongoing.

My building has no refrigeration. Does this apply to me too?

Yes. Climate control, access, cameras and lifts often work in the same way: they are connected to a network and a supplier can access them remotely. So the same questions are useful.

Is the IT-Label an IT Security Label?

No. The IT-Label shows which systems there are, whether they are connected to the IT network and whether networks are separated. It does not say that a building is safe. But it is the first step: without an overview, you cannot secure properly.

What is the difference between the IT-Label and the Security Audit?

The IT-Label assesses the entire digital infrastructure of the building and gives a level. The Security Audit only looks at security: wifi, network, server room and the separation of networks. It gives advice, but no label.

Who is responsible: the landlord or the tenant?

That depends on the system and the agreements. Often the landlord manages the building systems and the tenant manages their own IT. The most important thing is that it is recorded for each system.

Sources: RetailDetail, NOS and earlier articles by IT-Label. Status: 6 November 2026. The investigation into the attacks is still ongoing.

How does your building score?

Do the free IT-Label Self-Scan: ten questions, three minutes, an indication straight away. Start the Self-Scan

This article was written by the IT-Label editorial team, which is responsible for its content.

Share this article

Stay up to date with our knowledge articles

Receive our new articles on digital infrastructure in real estate in your inbox. No spam, unsubscribe at any time.

We only use your details for the newsletter. Read our privacy policy.

Have a question?

Contact us for more information about the IT-Label.

Get in touch

Request an IT-Label

Leave your details and we will get in touch to walk through the process.

Classifications IT1+, IT1, IT2, IT3, IT4, IT5