IT/OT convergence in buildings: why it happens and what it asks of you

Building installations and the computer network are growing together. That delivers a lot, but also requires clear agreements on ownership and access.

IT and OT in buildings·AI and the digital economy··8 min read·Editorial team: IT-Label

Key takeaways

  • IT/OT convergence means that the building installations (OT) and the computer network (IT) are increasingly becoming one whole.
  • It happens for good reasons: remote management, insight into energy use, apps for users and the obligation to install building automation.
  • It delivers a lot, such as lower energy use and faster fault resolution. But it also requires clear agreements on ownership and access.
  • The key question is not technical but organisational: who owns which system, and who is allowed to do what?

Two worlds become one

In the past, a building had two separate worlds. The IT partner looked after the computers and the network. The installer looked after the climate installation, with its own cables and its own control boxes. The two had little to do with each other.

Those days are over. The climate installation sends data to a dashboard in the cloud. The lifts report faults via the internet. The tenant controls the lighting with a phone app. This growing together is called IT/OT convergence, also known as IT/OT integration. In the first part of this series you can read what IT and OT are. In this part we look at why the two are converging, what that delivers and what it asks of you.

Infographic on IT/OT convergence in buildings: in the past two separate worlds, now connected through a secure connection. With four drivers and three things it asks of you.
Why IT and OT converge in buildings and what that asks of you. Source: IT-Label. Free to use with attribution.

Why IT and OT are converging

There are four drivers. They reinforce each other.

  • Remote management. An installer who can log in remotely sees a fault straight away and can often fix it without a site visit. That saves time and money.
  • Insight into energy. Owners and tenants want to know how much energy their building uses, and where it can do better. That requires meters and installations to share data.
  • Apps and convenience. Users want to book a meeting room, adjust the temperature or open the door with their phone. That app has to talk to the OT.
  • The obligation to install building automation. Larger non-residential buildings must have a building automation and control system (called BACS in European rules).

That last driver is a legal one. In the Netherlands, since 1 January 2026, the obligation applies to existing non-residential buildings with a heating or cooling installation of 290 kW or more. Since 29 May 2026, more extensive requirements apply to those buildings. From 2030, buildings above 70 kW will be added. The system must continuously monitor, log and analyse energy use, and be able to adjust it. It must also be able to communicate with the other installations in the building. In other words: the law calls for more connected OT. This obligation is the subject of a separate part of this series.

What it delivers

Convergence is not a problem you need to stop. It brings real benefits:

  • Lower energy use. Installations that are tuned to each other do not heat and cool at the same time, and do not run in empty rooms.
  • Faster fault resolution. An alert comes in immediately, also at night and at weekends.
  • Smarter maintenance. With data on wear, you can plan maintenance before something breaks.
  • More comfort. Users get a building that adapts to them, rather than the other way round.
  • Better reporting. Data on energy and use helps with sustainability reports and conversations with tenants and investors.

A building with a good digital foundation is therefore more attractive to tenants. Also read What are smart assets and IT building facilities?

Curious about your building's IT-Label?

Discover how your property scores on digital infrastructure.

Request an IT-Label

What it asks of you

The difficult part of convergence is not the technology. It is the agreements. Two parties that used to work separately now have to work together. And they have different habits.

The IT partner is used to installing updates often and briefly restarting systems. The installer is used to an installation running undisturbed for years. An update that is normal for IT can be a risk for OT. Conversely, an installer who sets up a connection to the outside with their own modem creates a hole in the security from the IT point of view.

That is why convergence requires three things.

1. Clear ownership. Who owns the network the OT is connected to? Who owns the building management system? Who owns the data it collects? In a multi-tenant building, that is not self-evident. Often the owner is responsible for the building installations and the tenant for its own IT. But who is responsible for the connection between them?

2. Agreements between the IT partner and the installer. Who installs the network connection for the installation? Who manages the firewall in between? Who reports it when something changes? Without agreements, both parties point at each other when something goes wrong.

3. Rules on who may do what. Who may log in remotely, to which system, and how? Who may change settings? Who may connect a new device? Remote access is convenient, but every connection is also a possible way in for others. In part 4 of this series you can read how attackers take advantage of that.

Seven agreements to put in writing

You do not need to write a thick policy document. Start with these agreements, on paper, with all the parties involved:

  1. Who owns each OT system, and who manages it?
  2. Who owns the network the OT is connected to?
  3. Which parties may log in remotely, to which systems, and via which secure connection?
  4. Who approves a new link or a new device?
  5. How and when are updates installed, without the installation coming to a standstill?
  6. Who calls whom in the event of a fault or a suspicious alert?
  7. Who keeps the overview of all OT up to date?

An overview of your OT is the starting point. You can read how to make one in part 2: Which OT is in your building?

Converging, but separated

Convergence does not mean that everything has to be on one big network. On the contrary. The installations may share data, but they do not belong on the same network as staff laptops or the guest Wi-Fi. Good convergence goes hand in hand with network segregation: each part its own network, with a secure and controlled connection between them. You can read how that works in the part on separating IT and OT networks.

The law looks at this too. Organisations that fall under the Dutch Cyber Security Act (Cyberbeveiligingswet) must properly secure their network and information systems, and OT is part of that. In Belgium, the NIS2 law pursues the same goal. Read more in the part on the Cyber Security Act, NIS2 and OT.

Curious about your building's IT-Label?

Discover how your property scores on digital infrastructure.

Request an IT-Label

What the IT-Label and the Security Audit do here

The IT-Label assesses the digital infrastructure of a building: the connection, the cabling, the Wi-Fi and the technical room. That is the foundation on which convergence rests. The IT-Label does check whether smart building systems are present, such as climate, access and cameras, but it does not assess how secure that OT is. The inspector does check whether the building management system is connected to the IT network. Then you know that IT and OT in your building are already linked.

Do you want to know whether that link is set up securely? In the Security Audit, an auditor checks on site whether your network is separated from guests, other tenants and the building systems. You receive a report with the risks and advice on how to segregate the networks.

Your next step

Start with the free IT-Label Self-Scan. In a few minutes you will see how well you know your building and where the points for attention are. Then go through the seven agreements with your IT partner and your installer.

This is part 3 of a series on IT and OT in buildings. A new part appears every Wednesday. Next week you can read why attackers choose the building management system, with real examples. All terms and parts can be found on the page IT and OT in buildings.

Frequently asked questions

What is IT/OT convergence?

IT/OT convergence is the growing together of IT and OT. Building installations such as climate, lighting and lifts are connected to the network, so that they can be managed remotely and share data with computers, dashboards and apps.

What is the difference between IT/OT convergence and IT/OT integration?

In practice, people usually mean the same thing. Convergence mainly describes the trend: the two worlds are growing towards each other. Integration more often refers to actually linking systems.

Why are IT and OT converging in buildings?

To manage installations remotely, measure energy use, offer users apps and comply with the obligation to install building automation. In the Netherlands, that obligation applies to non-residential buildings with a heating or cooling installation of 290 kW or more, and from 2030 also above 70 kW.

Who is responsible when IT and OT converge?

You need to agree on that. Often the owner is responsible for the building installations and the tenant for its own IT. Also record who manages the connection between them, who may log in remotely and who approves changes.

Is IT/OT convergence unsafe?

Not in itself. It only becomes unsafe when OT is connected to the network without agreements and without segregation. With separate networks, secure remote access and clear agreements, you can use the benefits and keep the risks small.

Does the IT-Label look at IT/OT convergence?

The IT-Label does check whether smart building systems are present, such as climate, access and cameras, but it does not assess how secure that OT is. The inspector does check whether the building management system is connected to the IT network. Whether the networks are properly separated is what we examine in the Security Audit, with advice.

How does your building score?

Do the free IT-Label Self-Scan: ten questions, three minutes, an indication straight away. Start the Self-Scan

This article was written by the IT-Label editorial team, which is responsible for its content.

Share this article

Stay up to date with our knowledge articles

Receive our new articles on digital infrastructure in real estate in your inbox. No spam, unsubscribe at any time.

We only use your details for the newsletter. Read our privacy policy.

Have a question?

Contact us for more information about the IT-Label.

Get in touch

Request an IT-Label

Leave your details and we will get in touch to walk through the process.

Classifications IT1+, IT1, IT2, IT3, IT4, IT5